agosto 15, 2018, 10:21:57

Autor Tema: Modificaciones por As-built mazda 3 2014  (Leído 391 veces)

0 Usuarios y 1 Visitante están viendo este tema.

 

Desconectado edyvsr

  • Mazda Ryuga
  • **
  • Mensajes: 110
Modificaciones por As-built mazda 3 2014
« : marzo 14, 2018, 22:37:52 »
Esta pagina es para modificaciones de los módulos que traen nuestros vehículos y algunas opciones vienen deshabilitadas por país.

Herramientas necesarias:
  • Programa Forscan- con licencia
  • Escaner ELM327 v1.5

Para empezar seria conveniente que investigaran un poco sobre lenguaje As-built si tienes duda aqui podria ayudarte con la configuracion siempre y cuando sepas un poco del tema.

Codigo por modulos

IC (Cuadro de instrumentos)
720-01-01

RBCM (rear body control module)
7B7-01-01

SSU (remote function actuator)
731-01-01

FBCM (Body Control module)
726-01-01

Para empezar con el procedimiento se debe conectar con el vehiculo, el programa forscan y el escaner ELM327
ejemplo con el cuadro de instrumentos:

IC:
720-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX (donde B0 es el primero par de numeros, B1 segundo par y así sucesivamente) B5 es la suma de comprobacion de B0 a B4, dentro de cada par de numeros existen 8 bits y cada uno activa o desactiva una opcion dentro del modulo. Aclaro no todas las funciones han sido descubiertas y el trabajo lo iniciaron en Mazda3revolution en el cual he realizado mis respectivas aportaciones.

B0 - it is (in BIN):
b7 - 0 or 1 = indicadores de cinturon de seguridad traseros 0=desactivado/1=activado
b6 - 0 or 1 = 0 - function is not known
b5 - 0 or 1 = 0 - function is not known
b4 - 0 or 1 = 0 - function is not known
b3 - 0 or 1 = 0 - function is not known
b2 - 0 or 1 = 0 - function is not known
b1 - 0 or 1 = 0 - function is not known
b0 - 0 or 1 = 0 - function is not known

B1 - it is (in BIN):
b7 - 0 or 1 = 0 - function is not known
b6 - 0 or 1 = 0 - function is not known
b5 - 0 or 1 = 0 - Medidor del nivel del liquido limpiaparabrisas 0=desactivado/1=activado
b4 - 0 or 1 = 0 - function is not known
b3 - 0 or 1 = 0 - function is not known
b2 - 0 or 1 = 0 - function is not known
b1 - 0 or 1 = 0 - function is not known
b0 - 0 or 1 = 0 - function is not known

B2 - it is (in BIN):
b7 - 0 or 1 = 0 - function is not known
b6 - 0 or 1 = 0 - function is not known
b5 - 0 or 1 = 0 - function is not known
b4 - 0 or 1 = 0 - function is not known
b3 - 0 or 1 = 0 - Alarma de velocidad maxima 0=desactivado/1=activado
b2 - 0 or 1 = 0 - function is not known
b1 - 0 or 1 = 0 - function is not known
b0 - 0 or 1 = 0 - function is not known

Ejemplo de como activar una opcion (alarma de velocidad): Esta es mi linea original
                 B0   B1     B2    B3    B4    B5
720-01-01  26   82     E2   26   80   59   en la B2 es donde se tiene que activar el bit b3, para hacer la suma
                                                               utiliza la calculadora de windows en modo programador hexa-byte,
                                                               para saber cuanto vale el bit3 simplemente da clic en el orden de los
                                                               00001000 esto te dara en la calculadora 8, ahora debes realizar la
                                                               suma E2+8=EA, el nuevo valor sera:
720-01-01  26   82     EA   26   80   5A    aqui se debe realizar nuevamente la suma completa de toda la
                                                                  linea 07+20+01+01+26+82+EA+26+80=61 la nueva linea sera:
720-01-01  26   82     EA   26   80   61


Y listo con esto tendrías activada la opción de alarma de velocidad en el el cuadro de instrumento de tu mazda 3. Para quienes estén interesados en experimentar hay mucho mas lineas...

Study SSU:
731-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 0 - I-Stop OFF, 1 - I-Stop ON (Tested on CX5)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known
B2 - configuration mode wireless control (step-by-step opening):
b7 - 0 or 1 = 0-W/O Advanced Keyless Entry; 1-W Advanced Keyless Entry
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 1-W Unlock mode (2-step); 0-W/O Unlock mode (2-step)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = 1-W Unlock mode (2-step); 0-W/O Unlock mode (2-step)
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

731-01-02 B0 B1 B2 B3 B4 B5(checksum) in HEX
B0 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 0 - I-Stop OFF, 1 - I-Stop ON (Tested on CX5)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

731-01-03 B0 B1 B2 B3 (checksum) in HEX
B0 - wireless mode lock/unlock is ONLY displayed on monitor (for example it is possible to configure only display the "unlock Mode"(step-by-step opening) or together with "Lock when leaving car":
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 1- NO visibility Lock when leaving car; 0 - visibility Lock when leaving car
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 1-Visibility Unlock mode
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = 1-Visibility Unlock mode
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

Study RBCM:
7B7-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = 0 - no auto door lock or 1 - auto door lock (activates door lock function in RBCM)
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 0 - 1x blinker when doors close from remote control or 1 - no blinker when doors close from remote control
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = 0 - no blinker when doors open from remote control or 1 - 3x blinker when doors open from remote control (w/alarm system)
b0 - 0 or 1 = function is not known
B4 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 0 - OFF 1 - ON (ability to lock doors when Ignition ON) tested on CX5
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 0 - OFF 1 - ON (ability to lock doors when doors open) tested on CX5
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = 0 - if engine work then not possible open boot or 1 - if engine work then possible to open boot (from button on boot)
b0 - 0 or 1 = function is not known

7B7-01-02 B0 B1 B2 B3 B4 B5(checksum) in HEX
B0 - it is (in BIN):
b7 - 0 or 1 = no data on use
b6 - 0 or 1 = 0 - OFF Find My Car or 1 - ON Find My Car (Press lock button twice on remote controller, You will hear a shortly horn) tested on CX5
b5 - 0 or 1 = 0 - It does not allow to open the trunk in the Drive mode (D) or 1 - It allows you to open the trunk in the Drive mode (D) tested on CX5
b4 - 0 or 1 = no data on use
b3 - 0 or 1 = no data on use
b2 - 0 or 1 = no data on use
b1 - 0 or 1 = no data on use
b0 - 0 or 1 = no data on use
B4 - it is (in BIN):
b7 - 0 or 1 = no data on use
b6 - 0 or 1 = no data on use
b5 - 0 or 1 = 0 - no auto door lock or 1 - auto door lock (only for visible this function on CMU)
b4 - 0 or 1 = no data on use
b3 - 0 or 1 = 0 - auto door lock or 1 - no auto door lock (only for visible this function on CMU)
b2 - 0 or 1 = no data on use
b1 - 0 or 1 = no data on use
b0 - 0 or 1 = no data on use

7B7-01-03 B0 B1 B2 B3 B4(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = Lighting Coming Home Light - ON
b4 - 0 or 1 = Lighting Coming Home Light - OFF
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

Study IC:
720-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B2 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 0 - OFF Beeper driver seat belt; 1 - ON Beeper driver seat belt
b5 - 0 or 1 = 0 - OFF Beeper passenger seat belt; 1 - ON Beeper passenger seat belt
b4 - 0 or 1 = 0 - disable I-Stop; 1 - enable I-Stop (enable/disable button I-Stop and view logo "I-Stop" on Instrument Cluster)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-01-02 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = 0 - Digital display Cruise control on IC; 1 - NO digital display Cruise control on IC
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B0:B1 - it is checksum for full configuration of car (IC)

720-04-14 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = 1 - W ALS (Headlight Auto Leveling System); 0 - W/O ALS
b4 - 0 or 1 = 1 - and if b5 = 0, then AFS and ALS (Adaptive Front Lighting system) is OFF, if b5 = 1, then AFS and ALS is ON; 0 - and if b5 = 1 then only ALS is ON
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-23 B0 B1 B2 B3 B4 B5(checksum) in HEX
B4 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 1 - Cruise Control with LIM
b5 - 0 or 1 = 1 - Standard Cruise Control/MRCC
b4 - 0 or 1 = 1 - W/O Cruise Control/MRCC
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-24 B0 B1 B2 B3 B4 B5(checksum) in HEX
B2 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = 1 - SCBS ON; 0 - SCBS OFF
b4 - 0 or 1 = 1 - SCBS OFF; 0 - SCBS ON
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-27 B0 B1 B2 B3 B4 B5(checksum) in HEX
B2 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 1 - REAR CAMERA with DYNAMIC ASSIST LINES (7 wires) ; 0 - REAR CAMERA with FIXED ASSIST LINES (4 wires)
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known
 

 

Desconectado Arturo_18

  • Mazda Minagi
  • *
  • Mensajes: 17
Re:Modificaciones por As-built mazda 3 2014
« Respuesta #1 : marzo 17, 2018, 11:42:23 »
Buen dia! Disculpa desconozco acerca del tema pero me intereza realizar la instalacion del control crucero en un mazda 3 2016 i touring, podrias asesorarme por favor?